FiberOptic 7010

Technical Specifications

Contact your local Schleuniger sales & service representative for a product demonstration. For more technical specifications please click the PDF document in the download section.

Click here to find your local sales & service representative

Machine	FiberOptic 7010
Wire / Cable	All cables containing Kevlar strength member
Means of Cutting	anvil and cutter
Max. Cable O.D.	0.18" (4.5 mm)
Shortest Length of Remaining Kevlar	0.12" (3 mm)
Max. Length of Remaining Kevlar	2.36" (60 mm)
Max. Length of Kevlar to be Cut	1.18" (30 mm)
Cycle Time	> 3 sec. (depending on number of strokes)
Interfaces	Foot pedal (included)
Power Supply	100/115/230 VAC, 50 / 60 Hz 1000 VA Vacuum system (not included)
Compressed Air Requirement	75 - 105 psi (0.5 - 0.7 MPa) consumption: 0.01 ft³/stroke (0.12 l/stroke)
Dimensions (L x W x H)	Cutting machine: 23.6 x 3 x 5.1" (600 x 75 x 130 mm) Vacuum system (not included): Ø 7.87 x 19.69" (Ø 200 x 500 mm)
Weight	Cutting machine: 6.6. lbs. (3 kg) Vacuum system (not included): 14.4 lbs. (6.5 kg)
CE-Conformity	The FiberOptic 7010 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Remarks	It is recommended to use a vacuum cleaner (not included). Ask your local sales & service representative for more information.
Note	Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.