CrimpCenter 64

Fully Automatic Crimping Machine

The CrimpCenter 64 is a new generation fully automatic crimping machine to cut, strip and terminate wires with up to 4 processing stations. At a maximum feed rate of 39.4 ft/s (12 m/s) , the CrimpCenter 64 crimps, seals, twists and tins wires from 26 - 10 AWG (0.15 to 6 mm²) with unmatched speed.

Various configuration possibilities make the CrimpCenter 64 one of the most flexible machines in its class. From seal to seal applications to twisting & tinning or double crimp applications, the flexible platform of the CrimpCenter 64 can be configured according to your production requirements.

With the optionally available thin & short wire processing kits, the CrimpCenter 64 easily processes wires down to 30 AWG (0.05 mm²) at a minimum wire length of only 1.38'' (35 mm).

A wide range of options allow you to further enhance the processing capabilities or customize the fully automatic crimping machine to your specific needs.

Minimize Setup Time - Maximize Productivity

All CrimpCenter models excel with exceptionally high processing speeds. With a unique system to reduce change-over times for cut strip terminate (CST) machines, Schleuniger has taken into account that productivity is more than just speed. Short setup and change-over times can significantly increase your output as well.

With the innovative ToolingShuttle 60 (a mobile quick-change unit), change-over of a crimping station takes less than 30 seconds. Depending on how often you change applications, this system can increase your productivity by 30% or more.

ToolingShuttle 60

The CrimpCenter 64 incorporates the latest technology in precision mechanics, electronics, software and networking. High output rates, short setup times and industry standard setting user-friendliness in both operation and maintenance make the CrimpCenter 64 a new generation cut strip terminate machine.

	Measure & cut to length
	Length encoder
	Horizontal and vertical wire straightener
	Full strip both sides
	Two step strip both sides
	Partial strip both sides
	Crimp to crimp (crimping of both wire ends)
	Crimp to crimp (closed barrel applications)
	Crimp to seal
	Seal to seal (crimp and seal both wire ends)
	Twist & tin to crimp
	Twist & tin to seal
	Double crimp (same terminal on both wire ends)
	Double crimp (3 different terminals)
	Double crimp with seal (same terminal & seal on wire ends)
	Programmable horizontal and vertical doubling
	Integrated crimp force monitoring (with SLP 2000 C and SLP 2000 CP)
	Good / bad sorting
	Wire list processing (sequencing)
	Change-over of crimp applicator, terminal reel and paper winder in less than 30 seconds with ToolingShuttle 60 using Plug & Crimp
	Zip cord processing* (slitting and crimping of both wire ends)
	Window strip*
	Splice detection*
	Pull-out force measuring* (pullforce measuring)
	Crimp height measuring*
	Electric crimp height adjustment*
	Inkjet wire printing / marking*
	Network integration*

*optional

Take the product tour for additional information including machine layout, processing stations, options and technical specifications.