CrimpCenter 62

High performance and short setup times
Simple operation with state-of-the-art software and touchscreen
Easy network integration into existing infrastructure (no proprietary technology)
Low maintenance costs due to use of standard components
Wide range of options and accessories available

Fully Automatic Crimping Machine

The CrimpCenter 62 is a fully automatic swivel arm crimping machine with up to 2 crimping stations specially suited for crimp to crimp applications. At a maximum feed rate of 39.37 ft/s (12 m), the CrimpCenter 62 allows high-quality crimping of wires from 26 - 10 AWG (0.15 to 6 mm²) at maximum productivity.

Check configuration possibilities

With the optionally available thin & short wire processing kits, the CrimpCenter 62 easily processes wires down to 30 AWG (0.05 mm²) and 1.38'' (35 mm) length.

Minimize Setup Time - Maximize Productivity

The CrimpCenter 62 is one of the fastest cut strip terminate machines on the market. However, at Schleuniger we know that productivity is more than just speed. Short setup and change-over times can significantly increase your output.

With Schleuniger's innovative ToolingShuttle 60, setup and change-over of a crimping station takes less than 30 seconds. Depending on how often you change applications, this system increases your productivity by 30% or more.

ToolingShuttle 60

ToolingShuttle System (TSS)

The CrimpCenter 62 incorporates the latest technology in precision mechanics, software and networking. The highest output rates, shortest setup times and industry standard settings for user-friendliness in both operation and maintenance make the CrimpCenter 62 a new generation cut strip terminate machine.

	measure & cut to length
	length encoder
	horizontal and vertical wire straightener
	full strip both sides
	2 step strip both sides
	partial strip both sides
	crimp to crimp
	crimp to crimp (closed barrel terminals with split cycle) *
	tip welding (resistance welding of wire ends)
	thin wires up to 30 AWG (0.05 mm²)
	integrated crimp force monitoring
	good / bad sorting
	wire list processing (sequencing)
	Change-over of crimp applicator, terminal reel and paper winder in less than 30 seconds with ToolingShuttle System (TSS) using Plug & Crimp technology
	window strip*
	splice detection*
	pull-out force measuring*
	crimp height measuring*
	electric crimp height adjustment*
	printing (inkjet or hotstamp)*
	network integration*