PreFeeder 3300

Prefeeding Machine, Dereeler Type

  • Overview

    The PreFeeder 3300 is a powerful cable feeding system for reels weighing up to 150 kg (330 lbs). The system distinguishes itself through its simple design and ease of use. For easy reel handling and fast changeovers, all axes are electrically driven. The PreFeeder 3300 uses a shaftless design for easy loading and unloading of reels.

    The integrated cable accumulator controls the speed of the dereeling drive. Surveillance functions provide greater security during setup and operation. With this concept a cost efficient solution for a wide range of applications is achieved.

    • Powerful cable feeding system for reels weighing up to 150 kg (330 lbs) with a maximum diameter of 600 mm (24”)
    • Shaftless design for easy loading and unloading of reels
    • Motorized axes for fast changeovers and simple operation
    • High feeding dynamic allows higher production rates and increases the economic efficiency of the processing line
  • Processing Capabilities

    • Prefeeding
    • Heavy Duty Processing

    Application Range

    Cable diameter up to 16 mm (0.63")
    Reel size up to 600 mm (24") in diameter
    Reel width up to 370 mm (14.6")
    Reel weight 150 kg (330 lbs)

  • Technical Data

    Reel Diameter

    300 - 600 mm (12 - 24“)

    Reel Width

    270 - 370 mm (10.6 - 14.6“)

    Reel Arbor Diameter

    40 - 125 mm (1.6 - 5.0“), other dimensions upon request

    Max. Reel Weight

    150 kg (330 lbs)

    Max. Cable Diameter

    16 mm (0.63“)

    Max. Dereeling Speed

    400 rpm

    Cable Accumulator Volume

    1.3 m (51”)1 loop; 2.9 m (114”) 2 loops

    Dimensions (L x W x H)

    2,430 x 1,270 x 1,660 mm (95.7 x 50 x 65.3“)

    Net Weight

    550 kg (1,210 lbs)

    Power Supply

    3 x 400 VAC, N, 2.2 KW, compressed air 6 bar (90 psi)


    The PreFeeder 3300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

    Important Notice

    Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.