CableCoiler 500

Coiling Machine

  • Overview

    Overview

    The CableCoiler 500 is a light-weight, economical single pan coiling machine used to coil wire or cable weighing up to 4 kg (8.8 lbs.).

  • Application Range

    Application Range

    The CableCoiler 500 is a light-duty, economical single pan coiling machine used to coil wire or cable. It is designed to interface with Schleuniger automatic cut and strip machines. Thanks to its flexibility, ease of use and ergonomic design, the CableCoiler 500 is the perfect solution to improve the production rate and efficiency of your wire or cable processing line.

    As the wire or cable exits the cut and strip machine, it passes through a guide tube and into the CableCoiler 500 coiling pan. The coiling pan speed is synchronized with the speed of the exiting wire or cable, making a uniform sized coil. The operator can change the diameter of the coil by adjusting the “Relative Speed” setting on the CableCoiler 500.

  • Technical Data

    Technical Data

    Max. Cable Diameter

    Up to 12 mm (0.47”)

    Cable Length Minimum

    1,800 mm (71.0”) depending on the coiling diameter

    Min. Coil Inner Diameter

    150 mm (6.0”)

    Max. Coil Outer Diameter

    300 mm (12.0”)

    Max. Coil Weight

    4 kg (9 lbs.)

    Max. Coiling Speed

    250 RPM

    Max. Wire Speed

    2.0 m/sec (6.6 ft/sec)    

    Wire Axis Height

    Adjustable from 864 – 1,067 mm (34.0” to 42.0”)

    Interfaces

     
    • WS/Postfeed interface (for use with Schleuniger machines with WS/Postfeed standard)
     
    • Optical interface (for use with other Schleuniger machines or 3rd party machines)
     
    • Footpedal to initiate machine cycle (active only when using the WS/Postfeed interface)
     

    Power Supply

    110, 115, 230 or 240 VAC

    Max. Power Consumption

    100 VA

    Compressed Air Required

    No

    Dimensions (L x W x H)

    610 x 560 x 1,000 mm (24.0“ x 22.0“ x 39.3”)

    Weight (net)

    20 kg (44 lbs.)

    CE – Conformity

    The CableCoiler 500 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

    Important Note

    Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

  • More Info

    Features

    • “Relative Speed” control for fully adjustable coiling speed
    • “Eject Time” control for adjusting coiling time after wire or cable is cut (only active with WS/Postfeed interface)
    • Supports new Schleuniger WS/Postfeed interface standard
    • Optical sensor for easy interfacing with machines which have no WS/Postfeed interface integrated or 3rd party cutting and stripping machines
    • Welded steel base with wide range of height adjustment
    • Locking casters for easy maneuverability