Programmable Twisting Machine
The WireTwist 500 is a programmable benchtop twisting machine for twisting multiple single wires from 22 - 14 AWG (0.25 - 2.5 mm²). It accepts stripped or crimped wires with or without seals. Twisting single wires gives the twisted wires a higher stability for easier wire routing and improved protection against electromagnetic interference.
The WireTwist 500 twists pre-processed wires that have been stripped, crimped or sealed. The final wire length (twisted) depends on the wire diameter and pitch length of the twists. Minimum wire length is approximately 18" (450 mm) and maximum wire length is approximately 79" (2,000 mm). Longer wires up to 197" (5,000 mm) are also possible using a wire guide between the power unit and holding unit.
Change-overs to different wire lengths and wire diameters are also done quickly and easily. Custom adapters for wires with housing or other special applications can be made according to customer specifications.
Programming the WireTwist 500 is simple. A clearly structured display allows quick adjustment of revolution speed and number of revolutions (forward and reverse). Parameters such can be saved to and loaded from the internal memory. This allows processing of different applications with high repeatability and consistent quality without compromising flexibility. For batch and total pieces, a counter is integrated.
Take the Product Tour for technical specifications.
|