Home | Employment | Contact | Login | Sitemap

Schleuniger websites: Corporate Site | Germany | Japan

Home > Products > Crimp Quality Assurance > PullTester 27

Crimp Quality Assurance
- MicroGraph System (MGS)

PullTester 27

Technical Specifications

Contact your local Schleuniger sales & service representative for a product demonstration. For more technical specifications, please click the PDF document in the download section.

Click here to find your local sales & service representative

Machine

PullTester 27
(standard)

PullTester 27-10
(special version)

Measuring Range

Up to 440 or 1,100 lbs.
(2,000 N or 5'000 N)
other variations possible

Up to 1,100 or 2,200 lbs.
(5,000 N or 10,000 N)
other variations possible

Units of Measure

Newton (N), kilopound (Kp), pound (lb.)

Applied Force Accuracy

0.2% of full scale

Max. Stroke

3.15" (80 mm)

Pull Rates

1" or 2" / min
(25 or 50 mm / min)

Pulling Modes

Pull + Break

normal pull test until wire breaks out (destructive test)

Device Data Memory

Not available

Monitoring

Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software

WinCrimp PC Software

Setting Protection

IP 20

Display

LCD 6-digit

Print Capabilites

Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface

Network

Possibility of connecting one device only. Can be combined with crimp force monitor and crimp-height measurements device via WinCrimp software.

Interface

RS 232

Motor

Motor 24 VDC

Power Supply

240 VAC

Dimensions (L x W x H)

25.2" x 15.7" x 11.8"
(640 x 400 x 300 mm)

Weight Approximately

100 lbs. (45 kg)

CE-Compatibility

The PullTester 27 and PullTester 27-10 fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Note

Specifications are subject to change without notice.

For more details take the