Prefeeding Machine Dereeler Type
The PreFeeder 2500 is an active dereeler and the ideal feeding system for wire, small cables and tubing. It is a simple solution for large production output and offers an excellent price / performance ratio.
The feeding process allows rapid acceleration of the motorized reel while maintaining low forces on the material being fed - a prerequisite for precision processing with short cycle times. Simple operation and easy handling when changing spools provide for short change-over times.
Choose Between Different Versions
Depending on your production needs, the PreFeeder 2500 can either be fitted with a pulley type accumulator or with the PreFeederControl 3 sensor pole.
| Pulley type accumulator |
| The accumulator with deflection pulleys stores up to 17.39 ft (5.3 meter) wire and allows for maximum acceleration at minimum stress on the wire – resulting in high production rates and consistent quality results of the downstream processing machine. For optimum wire guidance, the wire is constantly kept under low tension by the dancer arm. |
|
PreFeeder 2500 with pulley type accumulator
| >> |
virtual demo: |
 2 MB |
 2.2 MB |
- Ideal for flexible wires and tubes
- Pullforce during process > 2.5 N
- Large accumulator up to 17.39 ft (5.3 m)
- High feeding dynamics
|
| Sag control |
| Virtually tension-free prefeeding can be achieved using the PreFeederControl 3 sag control. A sensor constantly monitors the vertical position of the wire loop between processing machine and PreFeeder 2500. The dereeling speed is automatically adjusted according to the “sag” of the wire. In this system, the wire loop effectively acts as an accumulator. |
|
PreFeeder 2500 with PreFeederControl 3
| >> |
virtual demo: |
|
- Also for non-flexible (stiff) materials
- Virtually tension-free prefeeding (< 2 N)
- Smaller accumulator (approx. 1 m / 3.28 ft)
- Medium feeding dynamics
|
Take the product tour for technical specifications.
|