| Machine |
|
PullTester 28
(standard) |
PullTester 28-10
(special version) | |
| Measuring Range |
|
Up to 440 or 1,100 lb
(2,000 N or 5,000 N), adjustable
other variations possible |
Up to 1,100 or 2,200 lb.
(5,000 N or 10,000 N), adjustable
other variations possible | |
| Units of Measure |
Newton (N), kilopound (Kp), pound (lb.) |
| Applied Force Accuracy |
0.2% of full scale |
| Max. Stroke |
3.15" (80 mm) |
| Pull Rates |
1", 2", 4" / min and high
(25, 50, 100 mm / min and high) |
| Pulling Modes |
|
Pull + Break |
normal pull test until wire breaks out (destructive test) |
| Pull + Hold |
pull to a specified force and hold for up to 120 sec (non-destructive test) |
| Pull + Return |
pull to a specified force and reduce (non-destructive test) | |
| Device Data Memory |
Up to 48 jobs with 50 measurements in each job (2400 values) |
| Monitoring |
Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis
|
| Setting Protection |
IP 20 |
| Display |
LCD 6-digit |
| Print Capabilites |
Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface |
| Network |
Possibility of connecting several devices. Can also be combined with crimp force monitor and crimp-height measurement device via WinCrimp software. |
| Interface |
RS 232 |
| Motor |
Motor 24 VDC |
| Power Supply |
240 VAC |
| Dimensions (L x W x H) |
25.2" x 15.7" x 11.8"
(640 x 400 x 300 mm) |
| Weight Approximately |
100 lbs. (45 kg) |
| CE-Compatibility |
The PullTester 28 and PullTester 28-10 fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Note |
Specifications are subject to change without notice. |