PullTester 26

Technical Specifications

Contact your local Schleuniger sales & service representative for a product demonstration. For more technical specifications, please click the PDF document in the download section.

Click here to find your local sales & service representative

Machine

PullTester 26

Measuring Range

Up to 110 or 220 lb. (500 N or 1000 N), adjustable
other variations possible

Units of Measure

Newton (N), kilopound (Kp), pound (lb.)

Display

LCD 6-digit displays force value, LCD with 4 lines for operation

Applied Force Accuracy

0.3% of full scale

Max. Stroke

1.69" (43 mm)

Pull Rates

1", 2", 4" / min or high
(25, 50, 100 mm / min or high)

Pulling Modes

Pull + Break	normal pull test until wire breaks out (destructive test)
Pull + Hold	pull to a specified force and hold for up to 120 sec (non-destructive test)
Pull + Return	pull to a specified force and reduce (non-destructive test)
Pull + Hold + Break	pull to a specified force and hold for up to 120 sec (non-destructive test) and pull until wire breaks

Device Data Memory

Up to 48 jobs with 50 measurements in each job (2400 values)

Monitoring

Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis

WinCrimp PC Software

Setting Protection

IP 20

Display

LCD 6-digit

Print Capabilites

Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface

Network

Possibility of connecting several devices. Can also be combined with crimp force monitor and crimp-height measurement device via WinCrimp software.

Interface

RS 232

Motor

Motor 24 VDC

Power Supply

24 VDC

Dimensions (L x W x H)

16" x 8" x 5"
(405 x 205 x 130 mm)

Weight Approximately

18 lb. (8 kg)

CE-Compatibility

The PullTester 26 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Note

Specifications are subject to change without notice.

For more details take the